![]() ![]() Then the concrete is cleaned and prepped so it will bond correctly with the epoxy. The first step is to patch, level or fill any areas that need repair. ![]() provides written instructions 1 for applying an epoxy paint kit with a roller and brush, estimating this easy to moderate project takes nine hours spread over three days and costs about 120 to 160 per car bay, or 240-360 for a typical two-car garage.Įpoxy flooring systems can require one to seven coats to apply. Water-based epoxy paints are thinner and easier to apply but less durable than solvent-based epoxy coatings, which are thicker, cover more imperfections in the concrete floor, require workers to use respirators when applying, and typically cost more than water-based systems.Ĭosts for just the epoxy can start at about 30-50 a gallon for water-based epoxy paint, and can be 45-150 or more a gallon for solvent-based or 100 solid epoxy coatings.Ī thick coating may require more gallons to cover the same square footage as a thin paint.Ī professionally installed epoxy floor typically costs 3-12 a square foot, or 750-3,000 for a one-car garage (about 250 square feet) and 1,200-6,000 for a two-car garage (about 400-500 square feet), depending on the type of epoxy used and number of coats applied, and the application method (roller, squeegee, sprayer or trowel).Ī do-it-yourself epoxy floor kit can cost 50-600 or more, depending on the type of epoxy, the square footage the kit will cover, the number of coats required and the number of tools and other materials included in the kit.Ī solvent-resistant brush, a roller or squeegee, goggles, rubber gloves, a plastic water pail or other items may be required, costing up to 200. ![]() When mixed together, the resulting substance quickly hardens into a durable semi-gloss or high-gloss flooring surface (although epoxy may fade or yellow when exposed to direct sunlight).Įpoxy can be used on wood, cement, concrete or metal surfaces or as an undercoat beneath other flooring - but it is most often used on concrete floors in commercial or residential garages.īefore it dries, epoxy can be sprinkled with paint flakes or other chips to create designs or to simulate granite or other textures, andor colored sand or similar abrasives to make the surface less slippery. Medtronic Insulin pump was quoted at the same price. The insurance company paid 5,584.20 for the TSLIM, and I paid 1,131.20 out of pocket. Poor adhesion will result if product is thinned and used after pot life times. Once started, application should continue without a break, cutting in where necessary as the application proceeds. The mixed product should be allowed to stand for 5 minutes before application commences.
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. Archives
December 2022
Categories |